It had been waiting on the runway for some time, but now my tinkering with Raspberry Pi has finally been cleared for takeoff. After getting familiar with my FlightAware ADS-B dongle on Windows (previous post), using a RasPi as a 24/7 FlightAware feeder was a logical choice. No Linux knowledge required: just download the PiAware image, burn it on an SD card, boot the RasPi with it and claim your device with flightaware.com.
The essential program here is dump1090, a clever piece of software for decoding raw Mode_S messages to human-readable flight information. Collected data is made accessible through its built in web server, via TCP, or in json format (default address: http://<local_ip_address_of_piaware>:8080/data/aircraft.json). The program is also highly configurable:
The PiAware package comes with Skyview, a web interface for displaying received flight data from your receiver. It connects to a local web server, so no Internet connection is required. I also discovered that the Virtual Radar program that I use on my Windows PC can be configured to retrieve its data from RasPi’s dump1090 instance:
Note: the above setting will only grab ADS-B aircraft. If your Piaware receiver has MLAT enabled, you can configure a second receiver, listening to port 30105 of the RasPi. Then you can combine both aircraft types in a merged feed (Tools – Options – Merged Feeds) and select ‘Merged Feed’ as receiver in the Virtual Radar web page.
The Virtual Radar web interface is similar to Skyview, but it shows some additional information in the right pane, like aircraft photos. It can use a local aircraft database for filling in missing data like registration and aircraft type, based on the received ICAO code.
Now that I’ve come this far with my close-to-zero Linux knowledge, it’s time for some new challenges:
- Expand coverage by placing a second ADS-B receiver at the opposite side of my house, merging data from both receivers (= boost my FlightAware ranking) by having an additional instance of dump1090 acting as a hub (–net-only mode).
- Feed other flight tracking services with the same (merged) data, like flightradar24.com and – the original goal of this whole excercise – adsbexchange.com. There are scripts for that, but I want to make sure that they will not mess up my current setup.
- Make a local version of my What’s Up sketch, that gets its json data from the RasPi.
Some of this may require some (hopefully not too much) Linux knowledge, and at least SSH access to the RasPi(s), which is said to be easily achieved by putting an empty file named ‘ssh’ in the /root folder on the PiAware SD card.
So far, we’re on schedule. Stay on board and enjoy your flight.